The main causes of broken bicycle chains can include:
1. Normal wear and tear: The chain will eventually break because it will be subjected to friction and wear as it is used. This will cause the chain structure to become loose or deformed, which will eventually lead to the chain breaking.
2. The chain is not maintained properly: If the chain is not cleaned and lubricated at the appropriate times, dust and grime can accumulate on the chain, which can cause the chain to rust, strain, and even corrode.
3. Incorrect use of the operation It’s possible that the gear was changed with too much force, that the chain was broken by too much impact, or that the chain was hung between the wrong gears by mistake.
To increase the life of your bicycle chain, the following maintenance steps need to be performed with professional bicycle repair tools:
1. After riding the bicycle every time, you should use a bicycle chain brush to clean the chain in time to remove dust, dirt and other impurities. You can use professional bicycle cleaning agent or soapy water to wipe.
2. Bicycles that have not been ridden in a significant amount of time or that are not ridden on a regular basis need to have extensive maintenance performed on them at regular intervals. This maintenance should include cleaning the chain, sprocket, frame, and other parts, as well as lubricating the chain.
3. When lubricating the chain, choose the appropriate lubricating oil, avoid using lubricating oil that is too thick, and avoid applying an excessive amount of lubricating oil; otherwise, the oil will absorb dust and speed up the wear on the chain.
4. Check whether the bicycle chain is intact before riding. If the chain is found to be deformed, loose or damaged, use a bike chain breaker to replace it with a new chain in time.
Post time: Apr-03-2023