Yadda ake amfani da maɓallan maɓallin Allen

Yayin da ake hadawa ko tarwatsa skru ko bolts, anAllen maƙarƙashiyaana amfani da shi gabaɗaya don tarwatsawa da taro.Akwai nau'ikan maƙallan Allen da yawa, gami da Wrench na nau'in Allen da T-type Allen wrench.TheL-dimbin yawa Allen wrenchya haɗa da dogon hannu da ɗan gajeren hannu wanda aka lanƙwasa a tsaye kuma ya miƙe daga ƙarshen hannu mai tsawo.Tun da tsayin ɗan gajeren hannu ya fi tsayi fiye da tsawon dogon hannu, lokacin da aka haɗawa da haɗuwa ta hannun dogon hannu, yana da wuya mai amfani ya yi amfani da karfi mai yawa ta hanyar gajeren hannu, yana haifar da aiki mara kyau.Wutar hexagon mai siffar T mai siffa ta haɗa da abin hannu da aka ƙera gabaɗaya da ƙugiya, kuma abin rike an yi shi da kayan filastik.Saboda ƙaramin yanki na lamba tsakanin hannu da ruwan wukake, da kuma ɓarna na kayan aiki, ƙwayar filastik yana da sauƙin karye yayin rarrabawa da haɗuwa.Har ila yau, akwai wasu wrenches Allen masu nau'in T tare da hannaye da aka yi da kayan aiki mai ƙarfi don hana hannun daga farfashewa.Koyaya, sandar kayan aiki yana sauƙin sawa ko karye yayin aiwatar da lodi da saukarwa, kuma ana buƙatar maye gurbin kayan aikin.Tun da rikewa da mashaya kayan aiki an kafa su gaba ɗaya, lokacin da aka sawa ko karye kayan aiki, ko da za a iya ci gaba da amfani da hannun, dole ne a jefar da shi, kuma sabon maɓallin Allen yana buƙatar maye gurbinsa, wanda ya sa ya zama rashin jin daɗi. maye gurbin sandar kayan aiki.

Hanyar yin amfani da hannayenau'in triangle Allen wrench, rikewa ya haɗa da ɓangaren shigarwa da sandar haɗi;bangaren da ake sakawa ya hada da yawan abubuwan da ake sakawa;Ana iya shigar da maƙallan Allen a cikin ramin shigarwa;an saka nau'in haɗin kai a cikin rami mai haɗawa don haɗa abubuwan da aka saka;lokacin shigar da maƙarƙashiyar Allen, mai amfani zai iya yin hukunci akan abin da shigar da maɓallin Allen wrench yayi daidai da girman ramin shigarwa;nemo Bayan an shigar da abubuwan da suka dace, raba sassan biyu ta wani tazara mai nisa, wanda ya dogara da ainihin abin da ake buƙata cewa za a iya shigar da wrench Allen a cikin ramin shigarwa na bangaren da ya dace;an haɗa abubuwan haɗin gwiwa.

Yana da kyau a shigar da maɓallin Allen a tsakiyar hannun.
Lokacin da abin da ake buƙata ba ya cikin tsakiya, wuraren kowane nau'in sakawa yana buƙatar daidaitawa don saita sashin sakawa a matsayi na tsakiya.
An shirya ramukan haɗawa akan nau'in shigarwa a bangarorin biyu na tsagi na shigarwa, kuma ana iya shigar da maɓallin Allen akan ramin shigarwa ba tare da an cire sandar haɗi daga sashin shigarwa ba.
Hannun maƙarƙashiyar hexagonal tare da wannan tsari yana da sauƙi, dacewa kuma yana da ceton aiki don amfani tare da haɗin gwiwar maƙallan hexagonal.