In the process of assembling or disassembling screws or bolts, an Allen wrench is generally used for disassembly and assembly. There are many types of Allen wrenches, including L-type Allen wrench and T-type Allen wrench. The L-shaped Allen wrench includes a long arm and a short arm that is vertically bent and extended from one end of the long arm. Since the length of the short arm is smaller than the length of the long arm, when disassembling and assembling through the long arm, it is difficult for the user to apply a large force through the short arm, resulting in inconvenient operation. The T-shaped hexagon wrench includes an integrally formed handle and a shank, and the handle is made of plastic material. Due to the small contact area between the handle and the blade, and the brittleness of the handle material, the plastic handle is easily broken during disassembly and assembly. There are also some T-shaped Allen wrenches with handles made of high-toughness material to prevent the handle from shattering. However, the tool bar is easily worn or broken during the loading and unloading process, and the tool bar needs to be replaced. Since the handle and the tool bar are integrally formed, when the tool bar is worn or broken, even if the handle can continue to be used, it must be discarded, and a new Allen key needs to be replaced, which makes it inconvenient to replace the tool bar.
A method of using a handle of an triangle type Allen wrench, the handle includes an inserting component and a connecting rod; the inserting component includes a plurality of inserting elements; The Allen wrench can be installed in the installation slot; the connecting element is inserted into the connecting hole to connect the inserting elements; when installing the Allen wrench, the user can judge which inserting element the Allen wrench corresponds to by the size of the installation slot; find After the corresponding components are installed, separate the two components by a certain distance, which is based on the basic requirement that the Allen wrench can be installed in the installation slot of the corresponding component; components are connected.
It is advisable to install the Allen wrench in the middle of the handle.
When the required inserting element is not in the middle, the positions of each inserting element need to be adjusted so as to set the inserting element in the middle position.
The connecting holes on the insertion element are arranged on both sides of the installation groove, and the Allen key can be installed on the installation groove without the connecting rod being detached from the installation element.
The handle of the hexagonal wrench with this structure is simple, convenient and labor-saving to use in cooperation with the hexagonal wrench.
Post time: Feb-21-2022